911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-882003.png)
Removing hydraulic cylinder
CAUTION: Danger of injury by removing the circlips on the mounts.
-
Circlips are used to secure the mounts in the hydraulic cylinders.
-
The integrated springs ensure that the mounts are pretensioned even when retracted.
-
The circlips on the mounts must not be removed.
INFORMATION: The hydraulic lines, banjo bolts and sealing rings must always be replaced when replacing the hydraulic cylinders.
1. Pull cap -2- off the hydraulic cylinders -1-.
