911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
NOTICE: Fastening screws securing pump unit to bracket become loose
-
Risk of irreparable damage to pump unit
-
Do not unscrew the fastening screws used to secure the pump unit to the bracket.
-
The bracket cannot be replaced. In the event of damage, replace the pump unit.
INFORMATION: The hydraulic lines, banjo bolts and sealing rings must always be replaced when replacing the pump unit.
WARNING: Danger of injury if Pentosin sprays out.
-
The hydraulic cylinders and pump unit are pressurised.
-
Open banjo bolts very slowly to prevent the emerging Pentosin from spraying out.
INFORMATION: Counter at the hydraulic line with an open-ended wrench when loosening the banjo bolt.
1. Screw hydraulic lines off the pump unit.