911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Brake master cylinder mount
1 - Brake master cylinder mount
2 - Brake booster mount
Installing brake master cylinder
1. Install in reverse order. Tighten fastening nuts -1- on the brake master cylinder to the prescribed tightening torque. When fitting the reservoir,
make sure it engages correctly.
Brake master cylinder mount
1 - Brake master cylinder mount
2 - Brake booster mount
2. Bleed the brake system and adjust the brake-fluid level.
3. Carry out the following tests:
Check the system for leaks.
Then start the engine. Brake-related lights in the instrument cluster must go out when the engine is running.
Carry out a function test on the brakes.
Subsequent work
Install cover over brake master cylinder -(luggage compartment cover)-.