911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Vacuum Brake Booster: Service and Repair
Replacing Vacuum Line For Brake Booster (Section at Engine)
Replacing vacuum line for brake booster (section at engine)
Information
Removal and installation instructions relate to the vacuum line (vacuum hose/vacuum line assembly) -1- in the engine compartment.
The vacuum line (vacuum hose/vacuum line assembly) -1- is secured on one side at the tandem pump of the left camshaft (with two M6 Torx screws)
and is fitted on the other side at the connection point (plug-in coupling) -2- for the brake-booster vacuum line on the vehicle side.
Brake-booster vacuum line (section at engine)
Preliminary work
1. Remove air cleaner housing -3- and pressure pipe -4-. The instructions for removing the air cleaner housing -3- also covers removing the pressure
pipe -4-.