911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Installation position of coolant hoses and reservoir
3.3.
Install supply hose -3-. Attach the hose and tighten the spring band clamp.
Coolant supply hose and left Henn coupling
4. Fit coolant hoses at the coolant reservoir -1-.
4.1.
Connect the supply hose from the radiator -2- to the coolant reservoir and clip it in at the holder.
4.2.
Connect the overflow hose -3- to the coolant reservoir.
Coolant hoses at the reservoir
Subsequent Work
Warning
Coolant is hazardous to health.
Risk of skin irritation.
-
Wear protective gloves and goggles.
-
In the event of contact with the skin or eyes, wash immediately with plenty of water.
Danger