911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Thermostat: Service and Repair
Removing and installing coolant regulator
Preliminary Work
Warning
Coolant is hazardous to health.
Risk of skin irritation.
-
Wear protective gloves and goggles.
-
In the event of contact with the skin or eyes, wash immediately with plenty of water.
1. Remove air cleaner housing.
2. Drain coolant.
Removing coolant regulator
Information
Collect emerging coolant in a suitable pan.
1. Remove spring clamp on the Henn coupling -1- and pull off coolant hose -2-.
2. Move coolant hose -2- out of the work area.