911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Coolant regulator flange
3. Unscrew two Torx screws (M6) -Arrows- on the vacuum line.
4. Pull line -1- off the vacuum pump. Lay the line aside to enable easy access to parts.
5. Remove retaining bracket -2-.
Vacuum pump line
6. Unscrew three Torx screws (M6) -Arrows- on the cylinder head cap.
7. Remove cover -1-.
Camshaft housing cover
8. Unscrew three Torx screws (M6) -Arrows- on the coolant flange.
9. Remove coolant regulator cover and seal.