911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Loosening through bolts
6. Pull off through bolts.
Pulling off through bolts
Information
The through bolts in thrust blocks 2, 3, 4 and 5 -Arrows- can only be removed after lifting off crankcase half 1-3.
7. Lift off crankcase half 1-3.
8. Remove O-rings and through bolts on thrust blocks -2,3,4 and 5-.
O-rings and inner through bolts
Installing crankshaft
Caution
Risk of damage due to particles of dirt.
Danger of material damage due to blocked oil bores/oil ducts.
-
Absolute cleanliness is essential when working on the engine.
-
Lay removed engine parts on a clean base and make sure to cover them.
-
Use the cover for dust protection when fitting the engine NR.165 on the engine assembly support.