911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Inserting new O-rings into cylinder housing
13. Fit new O-rings onto the cylinder sleeves. Coat the O-ring area with a generous amount of special grease (Part No. 000.043.205.10).
Greasing O-rings on the cylinder sleeve
14. Fit outer cylinder sleeves in the cylinders. Align the cylinder sleeves in the cylinder. The flattened areas must face towards the other cylinder
sleeves in the longitudinal direction.
Fitting cylinder sleeves in cylinder housing
15. The recesses on the cylinder sleeve must align with the bores of the studs.