911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Notice
Loose parts in crankcase
Risk of engine damage
-
Cover crankcase bores with a clean cloth.
Information
It is advisable to get a second person to assist in fitting the circlip on the piston.
Check that the piston-pin circlips are seated correctly.
7. Fit pistons 2 and 5 on the connecting rod. Pay attention to direction of installation.
7.1.
Piston must be fitted so that the engraved arrow marking always points in the direction of the flywheel. In addition, the intake side is identified
by an engraved E.
Piston installation marking
7.2.
Cover crankcase bores with a clean cloth.
7.3.
Coat piston pin with fresh engine oil and slide it in as far as it will go.
Piston pins for middle pistons
8. Fit piston-pin circlip -1- on the piston by hand.