911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Vent lines on oil/water heat exchanger
3.2.
Install cycle valve -1- for active carbon filter.
Removing and installing cycle valve
3.3.
Press hose into the clip.
3.4.
Place fuel line on oil/water heat exchanger -1- and move plastic mounting -2- in the direction of the arrow.
Fuel line on oil/water heat exchanger
Installing small oil/water heat exchanger
1. Replace O-rings.
1.1.
Clean sealing faces for the small oil/water heat exchanger, remove escaping oil and coolant from the engine housing.
Insert O-rings -2- and grease with Kluber Syntheso Glep (Part No. 000.043.204.68).