911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Oil Filter Housing: Service and Repair
Removing and installing oil-filter console
Information
Overview
Overview of oil-filter console
1 - Oil-filter console
2 - Screws, M8 x 25
3 - Holder
4 - Screws, M6 x 12
5 - Screws, M8 x 16
6 - Seal
Preliminary Work
1. Remove pressure pipe.
Removing oil-filter console
Caution
Soiling of oil ducts
Risk of engine damage
-
Clean sealing faces and oil duct openings, then seal or cover them immediately.
1. Remove oil-filter console.
1.1.
Place a clean cloth on the generator to prevent it from being soiled by escaping oil.
1.2.
Remove holder -2- from the throttle housing.
1.3.
Unscrew screws, M8 x 25 -3- and M6 x 12 -4- and lift off oil-filter console -1-. Hold a cloth under the console to collect escaping oil. Remove
console.