911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Remove secondary-air pump.
5. Loosen intake air line at the turbocharger 1-3.
Intake air line cannot be removed.
5.1. Unscrew two M6 screws -arrows- and one M6 collar nut -1-. Disconnect intake air line with retaining bracket.
5.2. Press intake air line out of the bracket in the engine compartment.
5.3. Replace O-ring during assembly and grease with Kluber Syntheso Glep (Part No. 000.043.204.68).