911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6. Remove oil-filter console.
CAUTION:
Low load capacity of pipe and line connections.
-
Damage and leaks at pipe and line connections.
-
Always counter at the lines when loosening and fastening them.
7. Detach wiring harness and fuel line from the fuel collection pipe.
7.1. Pull cable rail -3- upwards at the fuel collection pipe and press to the side.
7.2. Disconnect cable plug -arrows- at the fuel injectors 1-3.
7.3. Detach fuel line -2- (a/f 17 and 19) and unscrew.
8. Remove intake-air distributor.
Unscrew screws -3- and carefully remove intake-air distributor -1- with left fuel collection pipe.
Use a 6-mm screwdriver insert with ball joint for screws that are difficult to reach.
Removing intake-air distributor, side 4-6
1. Remove rear apron.
2. Remove charge air cooler on right.