911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5.3. Unplug cable plug for cylinder 4 ignition coil -1-.
Pull cable plug -2- off the camshaft sensor.
5.4. Pull cable rail upwards from fuel collection pipe -arrow-.
CAUTION:
Low load capacity of pipe and line connections.
-
Damage and leaks at pipe and line connections.
-
Always counter at the lines when loosening and fastening them.
6. Detach oil line from the oil tank.
6.1. Loosen oil line -1- from the oil tank -2- using crow foot wrench, a/f 32 Nr.189. Counter with an open-ended wrench (a/f 32) while doing this.
Unscrew union nut.
6.2. Press line to one side to remove the fuel collection pipe.
7. Remove fuel collection pipe with fuel injectors 4-6.
7.1. Detach fuel line (a/f 17 and 19).
7.2. Remove two M6 screws -13-.
7.3. Detach fuel collection pipe -2- with fuel injectors 4-6 from the intake-air distributor.