911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6.4. Secure fuel line.
7. Install oil filler neck with holder.
7.1. Install holder for oil filler neck.
Tightening torque: 10 Nm (7.5 ftlb.)
7.2. Install oil filler neck.
8. Install right charge air cooler.
9. Install rear apron.
Installing centre intake-air distributor
1. Install centre intake-air distributor.
1.1. Insert centre intake-air distributor. Push rubber sleeves inwards and then position them. Tighten hose band clamps -7-.
1.2. Push on cable plug -8-.
1.3. Install holder -6-.