911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Connect line connections to the centre intake-air distributor.
Connect line connections -2, 3, 4, 5- to the centre intake-air distributor.
3. Install the transverse strut.
Position transverse strut -1-, screw in and tighten screws.
Tightening torque: 10 Nm (7.5 ftlb.)
Subsequent work
1. Raise the engine.
Raise the engine to assembly position using a retainer plate P 9592.
Screw in and tighten collar nuts for engine mounting.
Tightening torque: 85 Nm (63 ftlb.)
2. Install air cleaner housing.
3. Install pressure pipe.
4. Connect the battery.