911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-259002.png)
5. Unscrew two Torx screws (M6 x 12) -Arrows- and remove cover plates.
Installing cover plate
1. Insert the cover plates again and fit them using two Torx screws (M6 x 12) -Arrows- on each one. - Tightening torque: 10 Nm (7.5 ftlb.)
CAUTION:
Assembly of deformed heat shields.
