911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
5. Fit hexagon-head bolts (M8 x 50) -Arrows- on the restraining straps.
6. Fit and tighten Torx screws (M6 x 12) -1- on the cover plates. - Tightening torque: 10 Nm (7.5 ftlb.)
7. Fit and tighten M8 lock nuts -Arrows- and washers. - Tightening torque: 23 Nm (17 ftlb.)
8. Route oxygen sensor lines and clip them into the corresponding holders.
Subsequent work
1. Install bumper.
2. Install rear apron.
3. Install air cleaner housing.