911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
4. Use a Seeger circlip ring pliers to remove the Seeger circlip ring -E- on the pulley -C-.
5. Remove pulley -C- from the compressor.
6. Unscrew the two cap nuts -4- for the fuel cooler.
7. Unscrew the three fastening screws -5- securing the air-conditioning compressor.
8. The connection point for the electric line for the air-conditioning compressor is located behind the oil-filter console. Lever the connector out of the
plastic holder and pull it apart.
9. Screw off electric line for the solenoid coil on the compressor:
9.1. Lift the air-conditioning compressor up to allow easy access to the fastening screw -1- for the line connected to the solenoid coil.
9.2. Unscrew fastening screw -1- for the line connected to the solenoid coil.