911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-647004.png)
10. Remove Seeger circlip ring -F- for the solenoid coil using the Seeger circlip ring pliers. Remove the solenoid coil from the compressor housing.
Installing magnetic clutch
INFORMATION: If a new magnetic clutch is installed, the air gap between pressure plate and pulley must be checked with a depth gauge.
1. Place the solenoid coil -D- on the compressor housing. The lock pin -G- must engage in the locking hole -H-.
INFORMATION: When installing the Seeger circlip ring, the slanted surface of the Seeger circlip ring must point forward.
2. Position the Seeger circlip ring -F- for the solenoid coil -D- and fit it using the Seeger circlip ring pliers.
INFORMATION: When installing the Seeger circlip ring, the slanted surface of the Seeger circlip ring must point forward.
