911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Checking the magnetic clutch
Checking air gap of magnetic clutch
1. Check the air gap between the pressure plate and pulley using a depth gauge.
2. Place a rule on the outer edge of the pulley. Use a depth gauge to measure up to the pressure plate. Apply battery voltage to the magnetic clutch
and measure the distance (air gap) to the attracted pressure plate. Always measure at least three points on the pressure plate in order to obtain a
mean value. Distance: 0.5 mm ± 0.15 mm
3. If the air gap is not in the tolerance range, it must be adjusted using spacers -B-.
Subsequent work
Subsequent work for magnetic clutch
1. Install throttle housing.
2. Fit drive belt.
3. Fit pressure pipe.
4. Install air cleaner housing.