911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-658005.png)
17. Pull air conditioner forward on the right side, unscrew fastening screw -7- for B+ line holder and remove holder for heater/air-conditioning unit.
18. Pull/push heater/air-conditioning unit as far as possible in direction of passenger's seat.
19. Remove heater/air-conditioning unit from passenger compartment via passenger's door.
Installing heating/fresh air unit.
INFORMATION:
-
Do not remove the plugs until just before installing the expansion valve.
-
Check the condition of foam parts for damage; if in doubt replace.
1. Insert heater/air-conditioning unit in the vehicle over the passenger's side.
