911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-658006.png)
2. Lift heater/air-conditioning unit over the centre console and position under dashboard bracket.
3. Position holder for the B+ line on the heater/air-conditioning unit and tighten with the fastening screw -7-. - Tightening torque: 1.7 Nm (1.5 ftlb.)
4. Lay electric line from vehicle wire harness to heater/air-conditioning unit wire harness and fix with a tie-wrap.
5. Connect upper electric plug connection at heater/air-conditioning unit until it is felt to engage.
6. Connect upper electric plug connection at heater/air-conditioning unit until it is felt to engage.
