911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Subsequent work
Subsequent work on compressor/evaporator line
Fill in refrigerant.
Removing and Installing Evaporator-Fluid Tank Line
Removing And Installing Evaporator-Fluid Tank Line
Technical values
Preliminary work
Preliminary work line condenser-fluid tank
Draining refrigerant.
Removing cowl panel cover.
Removing the battery.
Removing the condenser-fluid tank line
INFORMATION:
-
Before re-installing the component, check the O-rings of the refrigerant lines for damage and replaced them if necessary.
-
Wet the O-rings of the refrigerant lines with refrigerant oil.
-
Do not open the plugs for the lines and connections until shortly before installation.
-
Close off all lines and connections using suitable plugs during removal.