911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
2. Push the line on and fasten it with the fastening screw -2-. - Tightening torque: 21 Nm (16 ftlb.)
Subsequent work
Subsequent work on compressor-condenser line
Screw compressor to engine block.
Install drive belt.
Fill in refrigerant.
Removing and Installing Condenser-Fluid Tank Line
Removing And Installing Condenser-Fluid Tank Line
Technical values
Preliminary work
Preliminary work for line condenser-fluid tank
Removing left front wheel.
Remove front left wheel housing liner.
Draining refrigerant.
Removing the condenser-fluid tank line
INFORMATION: When loosening or tightening the M8 refrigerant lines on the condenser, always counter with a 21-mm open-ended wrench.