911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Locked plug-in coupling
3. Fit pressure and return lines at the steering gear -arrow-.
Retainer plate
4. Close all line brackets (retaining clips) and fit the spacers (clips) between the pressure and return line. Check the positioning of the steering lines
once again and adjust them if necessary.
Subsequent work
1. Fill steering hydraulics with new Pentosin and bleed the steering system.
Checking steering fluid level (figure shows Carrera up to MY 2008)
2. Fit underbody panels.
Hydraulic Pump Pressure Line: Installing Support (Holder)
Hydraulic pump pressure line: Installing support (holder)