911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3.2. Screw in lambda sensor -5- downstream of catalytic converter -9-. Then tighten it with the open ring wrench Nr.98 and torque wrench Nr.92
Pos.1.
Tightening torque: 55 Nm (41 ftlb.)±5 Nm (±3.5 ftlb.)
4. Route lambda sensor lines.
4.1. Route lambda sensor line on side 4-6.
Clip lambda sensor line -2- with the black boot into the brackets -3, 4-.
4.2. Route lambda sensor line on side 1-3.
Clip lambda sensor line -2- with the black boot into the brackets -3, 4-.