911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
8. Remove additional coolant pump.
9. Remove knock sensor.
9.1. Pull off cable plug -3-.
9.2. Unscrew screw -2- and remove knock sensor -1-.
Removing knock sensor, cylinder bank 4-6
1. Remove throttle housing.
2. Detach and swivel out compressor.
3. Remove knock sensor.
3.1. Pull off cable plug -2-.
3.2. Unscrew screw -3- and remove knock sensor -1-.
Installing knock sensor
Installing knock sensor, cylinder bank 1-3
1. Install knock sensor.
CAUTION:
Knock sensor not installed correctly.
-
Risk of engine damage and modified exhaust emissions.
-
Strictly observe specified tightening torque for screw.
-
Align knock sensor in such a way that the sensor housing and cable plug are not touching.