911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Removing secondary-air pump
1. Remove secondary-air pump.
1.1. Unclip vacuum and fuel lines from the line bracket and secure to the coolant reservoir using a tie-wrap.
1.2. Pull off air hose -2- on secondary-air pump -1-.
Press rapid-action coupling together and pull off the released air hose -2-.
1.3. Remove screws -3-.
1.4. Disconnect electric plug connection -4-.
1.5. Carefully remove secondary-air pump -1-.
Installing secondary-air pump
1. Install secondary-air pump.
1.1. Insert secondary-air pump -1-. Guide secondary-air pump -1- through between the coolant reservoir and intake-air distributor.
1.2. Connect cable plug -4- to secondary-air pump.
1.3. Fit and tighten screws -3-.
Tightening torque: 10 Nm (7.5 ftlb.)
1.4. Attach air hose -2- to secondary-air pump -1-.
Rapid-action coupling must lock with an audible click.