911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-354003.png)
1.5. Open tie-wrap and move lines into installation position.
Subsequent work
1. Raise the engine.
Raise the engine to assembly position using a retainer plate P 9592.
Screw in and tighten M12 collar nuts.
Tightening torque: 85 Nm (63 ftlb.)
2. Install fuel filter.
3. Install air cleaner housing.
4. Install pressure pipe.
