911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Low load capacity of pipe and line connections.
-
Damage and leaks at pipe and line connections.
-
Always counter at the lines when loosening and fastening them.
5. Detach air conditioning compressor
5.1. Disconnect fuel line.
5.2. Pull engine compartment temperature sensor -1- out of the rubber holder.
5.3. Unscrew the fuel lines from the fuel cooler.
Counter at the fuel cooler (a/f 14) when unscrewing the union nuts -4-.
5.4. Remove compressor.
Remove three M8 screws -5-. Carefully remove compressor, place to one side together with refrigerant lines (use protective surface). If
necessary, secure with a tie-wrap to prevent them from slipping.
6. Remove the engine wire harness to create better access to the fuel collection pipe.