911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
6.1. Cut tie-wrap -arrow-.
6.2. Open round connectors on engine wire harness.
To do this, turn bayonet lock anticlockwise and pull off.
6.3. Unplug cable plug for cylinder 4 ignition coil -1-.
Pull cable plug -2- off the camshaft sensor.
6.4. Pull cable rail upwards from fuel collection pipe -arrow-.
CAUTION:
Low load capacity of pipe and line connections.
-
Damage and leaks at pipe and line connections.
-
Always counter at the lines when loosening and fastening them.
7. Detach oil line from the oil tank.