911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
7.1. Loosen oil line -1- from the oil tank -2- using crow foot wrench, a/f 32 Nr.189. Counter with an open-ended wrench (a/f 32) while doing this.
Unscrew union nut.
7.2. Press line to one side to remove the fuel collection pipe.
8. Remove fuel collection pipe with fuel injectors 4-6.
8.1. Detach fuel line (a/f 17 and 19).
8.2. Remove two M6 screws -13-.
8.3. Detach fuel collection pipe -2- with fuel injectors 4-6 from the intake-air distributor.
8.4. Disconnect cable plug for fuel injectors 4-6.
8.5. Guide out fuel collection pipe -2- in the direction of travel until it is exposed and can be removed.
9. Remove fuel injectors from the fuel collection pipe.
9.1. Remove spring clamps.
9.2. Pull fuel injectors out of the collection pipe.
9.3. Replace the O-rings before assembly if the fuel injectors are to be reinstalled.
Installing fuel injectors
Installing fuel injectors - cylinder bank 1-3
1. Replace O-rings -11 and 12- on the fuel injectors -9-.