911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
-
Damage and leaks at pipe and line connections.
-
Always counter at the lines when loosening and fastening them.
4. Fit oil line at the oil tank.
4.1. Fit union nut and secure oil line -1- to the oil tank -2- using crow foot wrench, a/f 32 Nr.189. Counter with an open-ended wrench (a/f 32)
while doing this.
Tightening torque: 60 Nm (44 ftlb.)
5. Fit air conditioning compressor
5.1. Insert compressor carefully. Position and tighten three M8 screws -5-.
Tightening torque: 23 Nm (17 ftlb.)
5.2. Connect cable plug for compressor.
5.3. Screw the fuel lines onto the fuel cooler and tighten them.
Counter at the fuel cooler (a/f 14) when tightening the union nuts -4-.
Tightening torque: 25 Nm (19 ftlb.)
5.4. Insert engine compartment temperature sensor into the rubber holder.