911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-670007.png)
6. Release connector guide on both sides -arrow a- and remove from the contact strip.
INFORMATION: Allocation of lines - see wiring diagram.
7. Release contacts of the damaged lines using the press-out tool 1575-1P of the press-out and unlocking tools for flat and round plug connections of
all sizes NR.155 -arrow a- and pull out of the contact strip.
8. Cut off the contacts of the damaged lines, isolate them and secure them to the main wire harness with tie-wraps.
9. Release connector on triggering unit for airbag -10- and fold open the locking lever.
10. Using a small screwdriver, lever the seal out of the connector housing.
11. Cut and remove tie-wrap for fixing the wire harness to the connector housing.
