911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
12. Release connector housing with a small screwdriver, lift upwards and remove from connector.
13. Lift connector guide and remove from connector.
INFORMATION: Allocation of lines - see wiring diagram.
14. Release contact of the damaged line using the press-out tool 1575-1P of the press-out and unlocking tools for flat and round plug connections of
all sizes NR.155 -arrow a- and pull out of the contact strip.
15. Cut off the contacts of the damaged lines, isolate them and secure them to the main wire harness with tie-wraps.
INFORMATION: Allocation of lines - see wiring diagram.
16. Push new lines into the contact strip until the contacts are felt to engage.