911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Pull out belt strap -Arrow C-.
Loosening seat belt and fitting
1. Lever off cap -1- with a screwdriver -arrow-.
2. Unscrew fastening screw -2-. Remove washer -3-, seat belt mount -4- and spacer sleeve -5-.
Installing rear three-point belt
INFORMATION: Ensure that belt strap can run properly.
1. Insert automatic belt device -1- sideways into the frame for roll-over protection system -2- -Arrow A- and position in the latch -Arrow B-.