911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Seat Belt: Service and Repair
Removing and Installing Rear Three-Point Belt
Removing And Installing Rear Three-Point Belt
Technical values
Preliminary work
1. Remove cover for the rear. Refer to Removing and installing cover for rear.
2. Remove back seat cushion. Refer to Removing and installing back seat cushion.
3. Removing rear wall trim panel. Refer to Removing and installing trim panel for rear wall.
Removing rear three-point belt
1. Unscrew fastening screw -1- from the automatic belt device -2-.
2. Lift automatic belt device -1- from the latch -Arrow A- and remove sideways from the frame for roll-over protection system -2- -Arrow B-.