911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-679004.png)
4. Use a screwdriver or similar tool to push in the lock in -direction of arrow- until it engages.
5. By gently pulling on the belt -1-, check the winding action of the belt strap.
6. Position deflector -2- and seat belt on the inner side section and secure with the fastening screws -1-. Tightening torque: 10 Nm (7.5 ftlb.)
Subsequent work
1. Install side trim panel. Refer to Removing and installing rear side trim panel.
2. Connect battery. Refer to Work instructions after disconnecting the battery
3. Read out the fault memory using the PIWIS Tester 97180.
