911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
/f6-3.6l_turbo/Page-36001.png)
Power Seat Switch: Service and Repair
Removing and Installing Switch For Seat Adjustment
Removing And Installing Switch For Seat Adjustment
Preliminary work
Remove control module trim panel (electric). Refer to Removing and installing control module trim panel.
Removing switch for seat adjustment
1. Carefully unclip the two control buttons -1- using a plastic wedge.
2. Unscrew the three fastening screws -1- and remove seat adjustment switch -2-.
Installing switch for seat adjustment
