porsche Workshop Repair Guides

Porsche Workshop Service and Repair Manuals

Procedures|Page 2674 > < Procedures|Page 2672
Page 9
background image

3.1. Unclip wire harness for Tiptronic control module.

4. Release and pull off connector for airbag sensor, centre left and right -42 and 43-.
5. Release and pull off connector for Park Assist control unit -44 and 45-.
6. Release and pull off connector for rear end convenience systems control unit -46 to 48-.

7. Loosen ground point under the driver's seat -49-.

7.1. Screw off fastening nut and remove ground straps.

8. Unclip ground point under driver's seat.
9. Release and remove connectors for telephone control unit -50 to 53-.

9.1. Unclip wire harness for telephone control unit.

Procedures|Page 2674 > < Procedures|Page 2672