911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
3. Unclip branch of line -C- to speed sender from the holder.
4. Remove connector, ground strap for cylinder 1 - 3 and the cable duct.
4.1. Release and disconnect connector -18-.
4.2. Unscrew fastening screw -21- for the ground connection.
4.3. Unclip cable duct -X1- from the fuel gallery.
5. Release connectors from engine wire harness on the right side and pull them off.
5.1. Release and disconnect connectors -41, 6, 5, 20, 14, 4, 12, 11, 10, 17, 30- one after the other.
5.2. Unscrew fastening screw -22- for the ground connection.
6. Unclip wire harness at two places on the oil-fill pipe holder and at one place on the intake pipe.