911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
7. Unclip wire harness at two places on the fuel gallery 4 - 6.
7.1. The line on the intake pipe is already unclipped when the intake pipe is removed.
8. Unclip cable duct -X2- from the fuel gallery.
9. Unscrew fastening screw on cable duct, then release and disconnect connectors.
9.1. Release and disconnect connectors -34, 32, 33- one after the other.
9.2. The plug connection for the air-conditioning compressor -35- is already disconnected when the air-conditioning compressor is removed.
9.3. Unscrew fastening screw -Z- for the cable duct.
9.4. Fastening nut for B+ line on the generator -23- is already removed when the generator is removed.
10. Unscrew fastening screw -B- for the water pump and lift the water pump to the side.
10.1. Release and disconnect connector for the knock sensor -16-.