911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Technical values
Preliminary work
Preliminary work on front ABS wire harness
1. Disconnect battery.
2. Remove front wheel housing liner (rear section).
3. Remove plenum panel cover.
Preliminary work on rear ABS wire harness
1. Disconnect battery.
2. Remove wheel.
3. Remove rear backrest.
4. Remove the rear side trim panel.
5. Remove trim panel for seat well.
Removing wire harness for anti-lock brake system (ABS)
Removing front ABS wire harness