911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
1. Release the cable retainer -arrow A- and pull off the two connectors -arrow B-.
2. Unscrew the fastening nut and remove the connector socket -arrow C-.
3. Remove the ABS wire harness from the brackets -arrows-.
INFORMATION: When cutting the ABS wire harness, make sure that there is enough line length left to join to the new lines.
4. Cut off the ABS wire harness around -a- and press inward with the rubber sleeve -b- -arrow-.
INFORMATION: Only for vehicles with TPM.
5. Cut through the rubber sleeve at the side of the HBA line -a- and remove the HBA line -arrow-.
Installing wire harness for anti-lock brake system (ABS)
Installing front ABS wire harness