911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Attaching return line
Check that the plug-in coupling is engaged correctly using special tool test tool 9623. Insert special tool into the groove and check that the
connector is seated correctly in the plug-in coupling by applying slight pressure. The connector must not slide out. The plug-in coupling is
designed so that there is axial play of approx. 1 mm in the plug-in coupling.
Test tool 9623
Fit circlip -D-.
Fitting circlip
2.2.
Fit (attach) the return line (thicker line) - as of model year 2009
Replace the O-ring -7- and axial spring -5- if necessary. Then connect the lines (plug-in coupling) -1 and 2- (-(arrow)-).