911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Cap nut
3. Screw connection hose 95071 onto charging valve.
Connection hose onto ATF - charging valve
Warning
Hot fluid
^
Danger of scalding
-
Let the fluid cool down.
-
Wear personal protective gear.
Warning
Hot fluid
^
Danger of scalding
-
Let the fluid cool down.
-
Wear personal protective gear.
Warning
Hot fluid
^
Danger of scalding
-
Let the fluid cool down.
-
Wear personal protective gear.
4. Top up ATF through the charging valve until ATF emerges at the inspection bore.
Checking and topping up the ATF
^
The transmission must not be in the reduced driving program.
^
The ATF temperature must be between - ATF temperature: 30 degrees Celsius and - ATF temperature: 40 degrees Celsius. An ATF inspection
when the temperature is too high causes insufficient filling, while an inspection when the temperature is too low causes over-filling.