911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Seals and Gaskets: Service and Repair
Removing and Installing Torque Converter Sealing Ring
Removing and installing torque converter sealing ring
Information
Notes
Information
When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
Information
Before installing the torque converter, check the hub for scoring. If damaged, the converter must be replaced.
Preliminary work
1. Remove transmission.
2. Put transmission in horizontal position.
Removing torque converter
1. Locating pin 95951 (long) must be removed from transmission housing.