911 Turbo Cabriolet AWD (997) F6-3.6L Turbo (2008)
Fixing the torque converter
Information
When pulling out, the torque converter must be kept horizontal, otherwise ATF can emerge.
2. Screw two screws (M8) into torque converter and remove torque converter using the screws from transmission input shaft.
Pulling out torque converter
Removing torque-converter sealing ring
1. Remove sealing ring for torque converter with hook VW 681.
Removing sealing ring
Installing torque-converter sealing ring
1. Thinly coat sealing lip of new sealing ring with Vaseline.
2. Drive in sealing ring with pressure piece 96700 as far as the mounting face.